Installing the Security System
75
Step P: Configuring the TouchScreen
If necessary, perform the following operations:
Modify the Entry and Exit delay time periods (see page
Modify the Alarm Transmission delay (see page
)
Modify the “swinger shutdown” (see page
)
Reset the TouchScreen to factory defaults (see page
Note:
This causes the device to require activation again, which in turn requires that the customer’s
account be reset as well.
Check for a new firmware update (see page
)
Manage the sensors/security zones (see
on page
Manage the cameras (see
Table 7: Manage Camera Operations
on page
)
Manage key fobs and key pads (see
Table 8: Manage Peripheral Operations
on page
)
Manage lights and thermostats (see
Table 9: Manage Environmental Device Operations
on page
Technicians also can perform the following general activities that are available to the customer.
Note:
See the
TouchScreen User's Guide
for information about these activities.
Manage the way sensors are listed in TouchScreen reports and tools
View and test the TouchScreen’s connectivity to the central monitoring stations
Manage the keypad codes and secret word
View the customer’s account information
Manage your TouchScreen device sounds, screensaver, etc.
View technical information about the TouchScreen device
