Technibel PHT 13, Installation Instruction

Page: 3 / 20

GB
3
1
8
2
14 4 5 7 6
9
3
13
10
11
12
1
- Sound-proofed hermetic compressor.
2 - Plate water heat exchanger.
3 - "Plate-Fin" air heat exchanger.
4
- Fan motor.
5 - Fan protection grille.
6
- Electrical box.
7 - Microprocessor control unit display
keyboard.
8
- Circulating pump.
9 - Pressure gauge.
10
- Water inlet connector.
11 - Water outlet connector.
12 - Filling / drainage of the water circuit.
13
- Air vent.
14 - Hole for connecting cables.
Materials:
- Copper piping.
- Painted sheet metal cabinet.
- Copper/aluminium air heat exchanger.
- Stainless steel water heat exchanger.
- Plastic grille.
2 - PRESENTATION
2.1 - DESCRIPTION
1.3 - VOLTAGE
• Before carrying out any operation, check that the voltage indicated on the unit corresponds to the mains voltage.
• Before initiating maintenance or servicing on the installation, check that its power supply is disconnected and locked out.
1.4 - USE OF EQUIPMENT
• This device is designed for heating buildings.
This appliance is not designed to be used by people (including children) whose physical, sensory or mental
capacities are impaired, or who lack experience or knowledge, unless they are supervised or have received
instructions on how to use the appliance by a person who is responsible for their safety. Children must be
supervised to ensure that they do not play with the appliance or its accessories.
1.5 - OPERATING CONDITIONS
• Refer to the technical specifications, the nominal conditions and operating limitations in the technical manual.
PHT 13
PHT 16
2.2 - DIMENSIONS AND WEIGHT
Weight (kg)
PHT 13 135
PHT 16
147
1
Water inlet connection 1" (male) with air vent valve
2 Water outlet connection 1" (male)
3
Water circuit fill/drain - 1/2" male
4 Holes for electric cables
340
30
123
5
190 190 810 370
1190
185
87 54
80
635.
5
4
3
1
2
IMPORTANT