Technibel K 60 D 066 Z, Installation Instruction, Page: 3 / 24

GB
3
• Water temperature sensor:
- Metal cap:
length: 41 mm
max. diameter: 8 mm
- With 3.5 meters of cable and retaining
clamp.
• Outside temperature sensor:
- Installed in a box with cable gland.
Note
:
This sensor must be installed in a location
that is sheltered from inclement weather.
See details in paragraph 5.2.
•
Electrical control box
:
- plastic box with transparent door + lock and wall mounting lugs + screws.
- grey colour, RAL 7035.
- IP 22, once installed.
- weight: 2.6 Kg.
- Equipment:
1 - Heating control electronic board
2 - Boiler authorisation relay
3 - Control system circuit breaker
4 - Terminal strip
5 - Control board accessory location
“Bi-PAC” (see specific installation manual)
1
5
3
2
4
4 - OPERATING PRINCIPLE
• The kit is designed allow complete installation control from the parameterable control box.
• The orders given by the control box are transmitted (via a two-wire BUS) to installation elements through the control board which
drives the generator and authorises boiler operation.
• The generator and the boiler are controlled according to a setpoint resulting from the water temperature calculated according
to a water law (according to the outside temperature). Priority is given to thermodynamic heating.
• Water temperature control is managed in relation to the sensor to be placed on the installation's return line.