Appendix A - Changing the Console Resolution
A-7
Use
nvedit
to remove the
video-timing
variable from
NVRAM using the following procedure:
1. Type
nvedit
at the
ok
prompt in Boot PROM mode.
2. Use
<Ctrl-n>
to move to the next line until the cursor is on
the line where
video-timing
is defined.
3. Type
<Ctrl-u><Ctrl-k>
to delete the line.
4. Type
<Ctrl-c>
to exit the
nvedit
editor.
5. Type
nvstore
to save the changes.
6. Type
setenv use-nvramrc? true
to enable the
NVRAM.
7. Type
reset-all
to restart the system.
This procedure can also be used to remove the
video-mode
variable if necessary.
See Appendix B for more information on
nvedit
commands.
Summary of Contents for RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE
