Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE, Installation And Reference Manual, Page: 19 / 68

Chapter 3 – Software Installation for I-Class Cards
3-3
prompt#
mount -F hsfs -O -o ro \
/dev/dsk/c0t6d0s0 /cdrom
prompt# cd /cdrom/I-Class
6.
To install the software, type:
prompt# ./install_all
This script will ask you a number of yes-or-no questions
(generated by Sun's
pkgadd
installation program).
Answer these questions appropriately.
7.
To install the MOX module and libraries, type:
prompt# cd /cdrom/cdrom0/mox
or
prompt# cd /cdrom/mox
[if the CD-ROM was mounted as outlined in Step 5
above]
prompt# pkgadd –d . TSImox
Note: You must install the MOX package in order to use the
MOX extension.
8. Reboot the system to complete the installation.
One new device name is created in the
/dev/fbs
directory for
each Raptor card. It is denoted by
rapqfp#
for Raptor 2500,
and
raptor#
for other cards (where
#
represents an instance
number assigned by the operating system).
Note: Device nodes will be created only for cards presently in
the system.