English
- 68 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note
: Cables shown in the illustration
are not
supplied.
• If your DVD player has an
HDMI
socket, you can connect via
HDMI
. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “
Input Selection
” section.
• Most DVD players are connected through
COMPONENT SOCKETS
. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When the connection is made, switch to
YPbPr
source. See, “
Input selection
” section.
• You may also connect through the
SCART 1
or
SCART 2
. Use a
SCART
cable as shown
below.
Component
video
inputs
Component
audio
inputs
SCART
cable
HDMI
cable
HDMI
inputs
Component
audio
cable
Component
video
cable
Scart sockets
REAR VIEW
Note
: These three methods of connection perform the same function but in different levels of
quality. It is not necessary to connect by all three methods.
02-ENG-37783W-1072 UK-37INCH-17MB12-PEU IDTV -(2 HDMI-3D PAN-S-SVHS-BASIC PIP-VGA)-50118892-C2.p65
07.11.2007, 11:04
68
