Tech Line TL-37LC783, Operating Instructions Manual

Page: 79 / 108

English - 78 -
while the “Select” item on Channel List
menu is highlighted via  or  buttons.
Moving the Channels in the Channel
List
• Press

or

buttons to select the channel
that will be moved.
• Press  or  buttons to select the ‘’ Move ’’
item on Channel List menu.
• “ Move ” is displayed next to OK item to indicate
that you can press OK to move the
highlighted channel to the desired position
on the channel list. Channel list OSD is
illustrated below:
SELECT i
OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Move More
1 BBC ONE
Selec t Delete Edit Nam e Loc k Fa vourites Move
Press OK button and the following OSD will
be displayed:
Edit number
New number
Enter a number by using the numeric buttons
on the remote control and press
OK to confirm.
Note : If you enter the same programme
number of the channel that you want to
move, “
.... channel services will be
replaced. Do you want to continue? ”
OSD will be displayed. Press OK to
confirm or select “ No ” to cancel.
Deleting the Channels in the Channel
List
• Press

or

buttons to select the channel
that will be deleted.
• Press  or  buttons to select the “ Delete ’’
item on Channel List OSD.
As seen on Channel List menu, “ Delete ” is
displayed next to OK item at the bottom of the
screen to indicate that you can press OK
button to delete the highlighted channel in the
channel list:
SELECT
i OK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Delete More
1 BBC ONE
Select Delete Edit Name Lock Favourites Move
Press OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:
The selected service will be permanently deleted, and
favourite list will be turned off. Are you sure?
Yes No
• Press  or  buttons to highlight the desired
option.
• If OK button is pressed while “ Yes ” is
highlighted, the highlighted channel will be
deleted.
• Selecting “ No ” cancels the deletion.
Renaming channels
To rename a specific channel, the channel must
be highlighted by pressing

or

buttons.
Then highlight the “Edit Name” item by pressing

or

buttons. Press OK button to activate
rename feature. Channel list menu OSD is
shown below:
02-ENG-37783W-1072 UK-37INCH-17MB12-PEU IDTV -(2 HDMI-3D PAN-S-SVHS-BASIC PIP-VGA)-50118892-C2.p65 07.11.2007, 11:04 78