Tech Line TL-37LC783, Operating Instructions Manual

Page: 83 / 108

English - 82 -
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
To install factory settings, highlight “First Time
Installation” menu item and press OK button,
then you will be asked whether or not to delete
the settings. Selecting “
Yes ” by pressing OK
button while the “ Yes ” is highlighted will delete
the existing channel table.
Are you sure you want to delete all channels and
settings for first time installation?
Yes No
After factory settings are loaded, “ First Time
Installation ” menu will be displayed.
The menu which is displayed for language
selection appears on the screen at first. By
using

or

buttons, select the desired
language option, and press OK button to
activate.
After the language is selected, a message
asking for automatic search appears on the
screen:
Do you want to start automatic search for DIGITAL channels?
Yes No
Highlight “Yes” item by pressing  or  buttons
and press OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for
analogue channels appears on the screen:
Yes
Do you want to search for
analogue channels?
No
Highlight “ Yes ” item by pressing  or  buttons
and press OK button to search for analogue
channels. The following menu appears on
the screen for analogue channel search:
Country
Language
D
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
TXT Language
Select your Country, Language and Text
language by using or and  /  buttons.
Press OK or RED button to continue. To cancel,
press the BLUE button.
Configuration
Press MENU button to display the main menu
and the

button twice to highlight
Configuration, then press OK button to display
the Configuration menu. Press MENU button
to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are
displayed in a list, along with a quarter-screen
image of the currently selected channel. You
can select a function by highlighting the
corresponding menu line using the

or

buttons. Configuration menu will look like this:
02-ENG-37783W-1072 UK-37INCH-17MB12-PEU IDTV -(2 HDMI-3D PAN-S-SVHS-BASIC PIP-VGA)-50118892-C2.p65 07.11.2007, 11:04 82