Tech Controllers ST-53.4, User Manual

Page: 35 / 44

35
NOTE:
Such controlling is possible only after purchasing and connecting the ST-505 control module or WiFi RS, which is not
included as standard equipment.
AMOUNT OF GENERATED ENERGY
After entering this option, a screen is displayed with the amount of energy generated by the heat pump (in kWh) daily, weekly,
monthly, annually and electric energy consumption, as well as the screen of energy consumption in individual months.
WORKING TIME
After entering the option, the times of operation of particular devices will be displayed (compressor, titanium anode, heater,
circulation pump) and the number of working days of the heat pump. The last indicator is maximum hot water temperature - along
with the date when it occurred.
SERVICE MENU
The functions available in the service menu are intended only for service workers having relevant qualifications. This menu is code-
protected and can be made available for the heat pump manufacturer.
SAVE TO USB FLASH DRIVE
Insert a flash drive into the USB port and select SAVE TO USB FLASH DRIVE function in the controller. A file containing data on the
amount of energy produced by the heat pump during the day/week/month/year and electricity consumption will appear.
STAND-BY
This function makes it possible to activate the standby mode in the controller (standby) - executive devices in the system will be
disconnected. The
ANTI-FREEZING function remains active – in the case temperature drops below the specified threshold, the
heater will be activated. The button is used when it is necessary to immediately turn off all the devices.