9. Service Menu
Service
other yes
Code:
x x x x
Clear All ?
yes exit no
Prog Access ON
- + exit yes
Adj. Access: ON
- + exit yes
Header:XXXXXXXX
Set exit yes
Channels: X
- + exit yes
Skip Messages:
yes exit no
Duration Test
yes exit no
Function Test
yes exit no
Select Options
yes exit no
Adj Dispens Pump
yes exit no
Adj.Prime Pos.
yes exit no
Service End
yes other
Standby Mode
Enter required code
Clear all programs and settings from memory
Attention: This deletes the parameter settings which
require special tools to be redefined
Select access to programming procedure
Select access to Adjust menu
Set Header
Set number of dispensing channels fitted
(1 - 4)
Select if warning message are to be skipped
For service engineer only
Exit Service menu
For service engineer only
For service engineer only
For service engineer only
For service engineer only
If access is off the Adjust menu is omitted
from the Mode Selection menu.
If access is off the program menu is omitted
from the Mode Selection menu.
Adj.Plate Ref.
yes exit no
For service engineer only
9-2
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
May 2003
