49
WARNING: MAKE SURE THE MAIN POWER IS OFF.
WARNING: THIS MACHINE HAS ROTATING ROLLERS AND CAN CAUSE
SERIOUS INJURY. YOU MUST WEAR SAFETY GOGGLES AND GLOVES AT ALL
TIMES WHEN YOU ARE CLEANING THE UV COATING SYSTEM.
WARNING: THE UV COATER DOCTOR BLADE HAS SHARP EDGES AND CAN
CAUSE SERIOUS INJURY.
Never leave the rollers engaged when not in operational. This will cause a flat
spot on the rubber roller and affect the coating quality.
Note: Before cleaning allow the excesses UV Coating to drain back into the
5-gallon pail.
1)
Make sure your main power is
OFF.
3)
To clean the rollers you must use Tec Lighting UV wash solution
TEC501
and
cleaning cloth
TEC560027.
2)
Carefully open the plexi-glass cover.
SECTION 14.0 UV COATER CLEAN UP PROCESS
