background image

10. REGISTERING PROCEDURE AND PRINT FORMAT

 

EO1-11152 

 

10.55 Salesperson Entry (Salesperson Sign-ON)

 

10-37 

10.55  Salesperson Entry (Salesperson Sign-ON) 

This operation is used for performing sales management of each salesperson. 
 
 
 |Salesperson 

Code| 

[SALES PERSON] - 

 

1 to 99

 

 
... The name of the person is displayed and printed on both journal and receipt. 
 
Programmable options relating to Salesperson Entries: 

•  Salesperson’s name non-print on receipt (print on journal only) 
•  Salesperson Entry compulsory before sale item entries 
•  Salesperson Entry Prohibited during a sale (i.e. allowed only one person entry at the starting of a sale but 

prohibits any other salesperson entry once the sale is started.)  When this program option is not selected, 
up to five salespersons can sign-ON during one sale. 

The salesperson entry status (salesperson Signed-ON condition) will be held until: 

•  Another salesperson entry is operated, or 
•  The sale is finalized. 

 
NOTE:  After a Salesperson Entry, the mode change is prohibited. 
 

-- Receipt Print Format -- 

 
 
 
 
 
 

10.56  Hold & Recall 

You can interrupt one customer’s transaction with other customer’s transaction. 
 
 
 

Sales item entries 

[HOLD/RECALL] 

Operate sale item entries and 

 

for Customer A 

finalize for Customer B. 

 

Temporary finalization of Customer A Sale (HOLD)

 

 
 
 [HOLD/RECALL] 

Additional entries if any and real sale finalization for Customer A. 

 

Recalling Customer A Sale (RECALL)

 

 
 

Sale for Customer A (HOLD) 

Sale for Customer B 

Sale for Customer A (RECALL) 

 
 
 
 
 
 
 
 
 

The same Receipt Consecutive No.

 

 
NOTES:  1.  The All Void operation is not possible during a Hold transaction. 
 

2.  After a Hold operation, the mode change, Sign-OUT, and Sign-OFF are not possible. 

 

OPERATION 

OPERATION 

Salesperson Code 

Salesperson’s Name 

 6WDF\

68%7/

∗∗

+2/'

+2/'

∗∗

-21(6

 70

'3

'3

7)

'3

'3

7)

7$;

&$6+

,7(0

-21(6

 70

∗∗

5(&$//

5(&$//

∗∗

7$;

&$6+

,7(0

-21(6

 70

Summary of Contents for MA-1595-1 SERIES



























































































































































































































Reviews: