Revised 08/04
6
Pedestal Base (Sterling II and III)
1. Remove the Pedestal Base from the packaging
materials and set it on a level surface.
2. Place the Grill Housing on the Pedestal Base and
align the round mounting holes in the Base with the
threaded inserts in the Housing.
3. Fasten the Housing to the Base with the supplied
hardware. (Hardware needed: Four (4) each
1
/
4
- 20 x
1
/
2
"L hex head bolts and flat washers.) (See Figure 3.)
Figure 3.
Pedestal Base
In-ground Post Base and Bolt-down Post Base
(Sterling II Only)
1. Install the In-ground or Bolt-down Post Base in
accordance with the instructions accompanying Post
Base.
2. Fasten the Housing to the Base with the supplied
hardware. (Hardware needed: Four (4) each
1
/
4
- 20
x
1
/
2
L hex head bolts and flat washers.) (See Figures
4 & 5.)
Figure 4.
In-ground Post (Sterling II Only)
Figure 5.
Bolt-down Post (Sterling II Only)
Assembly
continued
26
1
/
2
"
17
1
/
2
"
2
1
/
2
"
GROUND
1/4 - 20 HEX. BOLT
W/ FLAT WASHER
(TYP. BOTH ENDS)
1/4 - 20 HEX. BOLT
W/ FLAT WASHER
(TYP. BOTH ENDS)
