The battery charge status is displayed in the top right corner of the
display. When the battery is discharged, the battery frame will flash
to indicate the battery needs to be recharged immediately.
The power draw from the battery by the electric bicycle can be read
under the battery charge status indicator in real time.
If there are any faults with the electrical system, an error code will
be displayed at the bottom of the display. Consult TEBCO or your
retailer for assistance.
Pedestrian Function
The Explorer has an in built 6 km/h pedestrian function so that
the bike can be safely wheeled under power whilst walking beside
it. To activate, hold down the ‘-‘ button for as long as you wish to
walk the bicycle.
Headlights and Taillights
To switch ON the headlight and taillight, press the ‘headlight’
button. To switch OFF the headlight and taillight, press the
‘headlight’ button again.
NOTE: The display backlight will dim when the headlight and
taillight are illuminated.
PAS Setting
The pedal assist function sets the amount of assistance from the
motor when pedaling. This is adjusted with the ‘-‘ and ‘+’ buttons.
The default level is 0 (zero) - no output power. This can be
adjusted between 0 (zero) and 9 (nine) as desired by the user.
