ADJUSTMENT NOTES
If the Quick Release Lever can be easily pushed to the
CLOSE position, the clamping strength is insufficient.
●
Return the lever to a position at right angles to
the fork.
●
Turn the Adjusting Nut clockwise to increase the
clamping strength.
●
Push the lever back to the CLOSE position to
check the clamping strength.
●
You will need a reasonable amount of force to
CLOSE the lever to ensure the adjustment is
correct.
NOTE: If you are not sure of any of these steps or
how the quick release mechanism operates ask
your bicycle retailer.
REMOVING THE REAR WHEEL
●
Set the rear gear lever so that the chain can be
moved to the smallest cog.
●
Release the Brake Quick Release (see Removing
the Front Wheel)
●
If fitted with axle nuts, use the correct spanner to
loosen the axle nuts enough to allow the wheel to
be removed.
●
If fitted with a Quick Release Lever, move the lever
into the OPEN position. This allows the wheel to be
removed.
●
Lift the bike off the ground 30-50mm, push the
wheel forward and down until it comes out of the
dropouts.
