2.
There is no specific maintenance required on your electrical components. Simply
re-charge your batteries after each ride to ensure longest possible life.
3.
Adjustment of the height of saddle. Loosen quick release on seat tube and adjust saddle
to a suitable height. The raised height of the saddle cannot exceed the height marked with
minimum insertion mark on saddle stem.
4.
Brakes and their adjustment are standard to the bicycle industry. Be sure to keep brakes
properly adjusted at all times.
5.
Regular checking of spoke tension and wheel alignment can also ensure maximum
performance of your Bicycle.
Tyre Pressure:
1.
It is most important for continued effective operation of your
Explorer
that you maintain
the correct tyre inflation.
2.
Both front and rear tyres should be maintained at Min 40psi and Max 65psi inflation.
Safety Precautions
1.
Always make sure key or remote device is in OFF position when you mount or dismount
your bicycle. Only turn power ON once you are safely seated on your bicycle.
2.
When starting the bicycle, the twist grip throttle should be turned slowly and evenly to
ensure smooth gentle acceleration.
3.
Never try to RACE your bicycle or ride at high speeds for long periods of time.
4.
Never try to climb hills that are too steep and that will force the bicycle to slow below
10kms. Best performance is achieved on flat or gently rising terrain.
5.
When either the left or right brake lever is engaged, a micro switch will cut power to motor.
Should either of these switches fail to work at any time please contact your supplier
immediately.
6.
In wet or rainy weather, the bicycle should be ridden slowly and with much greater care.
Main technical parameter
1
Dimensions – L 1780mm x H 1100mm x W 650mm
2
Wheelbase ~ 1060mm
3
Weight 22kg
4
Carrying Capacity ~ 120kgs
5
Max Speed 26kmh
6
Maximum Range 40km Electric Power – 80km Pedal Assist Mode
7
Minimum Ground Clearance 160mm
8
Lithium Battery 1pc x 36v 10Ah
9
Motor ~ Brushless geared
10
Rated Continuous Output 200W / 250W
