FOR REPLACEMENT BATTERIES –
CONTACT TEBCO DIRECTLY ON 03 9584 3000
Operating Methods
Before operating:
1. Depress Power ON / OFF button
to ‘Power ON’ Explorer – LCD Indicator Panel will
activate.
2. If battery status gauge does not show at least half full – recharge before you attempt to
ride. (To extend battery life -
re-charge batteries every time you get home
.)
3. Check both brakes to see if they are both working effectively. Check ‘Honka Hoota’
operation.
4. Check the pressure of front and rear wheels. Pressure should be Min 40psi – Max 65psi
Riding Technique
1.
Position side ‘Prop Stand’ to up position adjacent to chain stay..
2.
Seat yourself comfortably on seat. If seat too high or too low - adjust to suit your comfort.
3.
Depress Power ON / OFF button
to ‘Power ON’ Explorer – LCD Indicator Panel will
activate.
4.
The
‘Explorer’
is powered by a 9 Level
‘Pedal Activation System’
– Select desired PAS
level simply by depr or – buttons on Left Hand Side Controller Panel and start to
pedal - power will automatically activate the motor.
5.
The
‘Explorer’
is also fitted with a ‘Twist Grip Accelerator’ which is speed governed at
max 6kmh – use of this Accelerator can assist at ‘take-off’ for the rider.
6.
To decelerate ‘cease pedalling’ and controller will automatically cut power to motor.
7.
Slowly pull on both brake levers to ‘brake’ and slow the bicycle to a stop.
Power ‘Override Switches’
Your Explorer is equipped with 2 power ‘Override Switches’
1.
These are small micro-switches situated within each brake lever.
2.
By simply pulling either brake lever on slightly – power is cut to the motor.
3.
These are safety switches, which can prevent your bicycle from accidentally ‘starting’
whilst you are stationary.
