Maintenance, care and disposal
Disposing of equipment
48
299-020200-TWD01
14.07.2017
6.3.3
Annual test (inspection and testing during operation)
The welding machine may only be tested by competent, capable personsl. A capable person is
one who, because of his training, knowledge and experience, is able to recognise the dangers
that can occur while testing welding power sources as well as possible subsequent damage and
who is able to implement the required safety procedures.
A periodic test according to IEC 60974-4 "Periodic inspection and test" has to be carried out. In addition
to the regulations on testing given here, the relevant local laws and regulations must also be observed.
6.4
Disposing of equipment
Proper disposal!
The machine contains valuable raw materials, which should be recycled, and electronic
components, which must be disposed of.
• Do not dispose of in household waste!
• Observe the local regulations regarding disposal!
6.4.1
Manufacturer's declaration to the end user
• According to European provisions (Directive 2012/19/EU on Waste of Electrical and Electronic
Equipment), used electric and electronic equipment may no longer be placed in unsorted municipal
waste. It must be collected separately. The symbol depicting a waste container on wheels indicates
that the equipment must be collected separately.
This machine has to be disposed of, or recycled, in accordance with the waste separation systems in
use.
• According to German law (law governing the distribution, taking back and environmentally correct
disposal of electric and electronic equipment (ElektroG)), used machines are to be placed in a
collection system separate from unsorted municipal waste. The public waste management utilities
(communities) have created collection points at which used equipment from private households can be
disposed of free of charge.
• Information about returning used equipment or about collections can be obtained from the respective
municipal administration office.
• TEAMWELDER
is registered for the Rema® System for disposal and recycling with the Reg. No.
07416/08-ECZ, and EKO-KOM with the Reg. No. F00034148.
6.5
Meeting the requirements of RoHS
We, TEAMWELDER Germany GmbH, hereby confirm that all products which we supply to you that are
subject to the RoHS Directive comply with the requirements of the RoHS (Directive 2011/65/EU).
