19
6 Troubleshooting
Type of errors and elimination
If an error occurs then this is signaled by the red ERROR LED whilst the error message is
shown on the printer’s display. Different error codes indicate the cause of the problem.
"Rectifiable errors" are usually film or transport errors, which are simple to remedy.
In a normal case it is possible to recover the error after eliminating the problem and
pressing [SET] key, after which the device is once again ready for operation.
"Non-rectifiable errors" are triggered by defective hardware. If a restart does not solve the
problem then service intervention is necessary.
In the event of a "system error" the device must be returned to the factory.