11
4 Laminating
Switching on the Printer & Laminator
①
At first, Switching on the Laminator.
The device carries out initialization with a simultaneous self-test. If no error is present,
heated roller heating commences.
②
Next, Switching on the Printer.
If the Laminator is at heating status, the Printer’s display indicates “Initializing / Lami
Warm up”.
After roughly 8 minutes the Laminator is ready for operation and the display indicates
“Ready to print”.
It is assumed that Laminator’s film is already present inside the device.
Refer to the chapter 6 “
Troubleshooting
” when Error Message was indicated.
Refer to the chapter 5 “
Configuration
”, then check the “Connection” menu.
The display indicates “CONNECT” when the Laminator is connected to the Printer
correctly.
Connection
CONNECT