16
Configuration settings
①
Connection
Showing the connection of the Laminator.
Connecting
:
CONNECT
Disconnecting
:
DISCONNECT
②
Version
Showing the firmware version.
③
Serial Number
Showing the serial number of board.
④
Tag Info
Showing the 8-digit tag information.
⑤
Foil Type
Setting the film type.
Setting range:
Patch: Patch (1mil) (always with black marking)
HOLO (INDEX): Thin film (Reference) with black marking
HOLO (NO INDEX): Thin film without black marking
The difference between patch and thin film with black marking is another lamination
position of the card.
⑥
Temperature
Setting the thermal energy for the heated roller for lamination. The correct temperature
must be experimentally determined with consideration to the lamination speed, the film
and the plastic card. The presetting must be considered a guideline value.
Setting range:
120...150...180 degree C