17
⑦
Lamination Speed
Setting of the transport speed of the document during lamination. The correct speed must
be experimentally determined with consideration to the lamination temperature, the
laminate film and the plastic card. The presetting must be considered a guideline value. In
order to carry out a test it is possible to start the motor via
Setting range:
4...6...20 mm/s
⑧
Delay (x10)
Setting the waiting time, once the heated roller has lowered and lies on the document.
Only after this time does the actual lamination start.
Setting range:
LCD
0
1
…
20
…
200
Delay (ms)
0
10
…
200
…
2000
⑨
Cool Down Time
After settled cooling time, the status will be set to INPOS. Time is start after card is in
park position and ready to eject to the printer.
Setting range:
0...30...60 s
⑩
Lamination Length
Setting the lamination range.
Setting range:
80...86...100 mm
⑪
Foil Further Move
Setting the foil further move. This parameter is important to separate the foil after
lamination from the card.
Setting range:
10...18...30 mm