4
Intended use
The device is constructed in accordance with the latest engineering practice and per the
recognized safety regulations. Nevertheless, danger to the life and limb of the user or third
parties or damage to the device and other property may occur when using it.
The device must be operated exclusively when in a technically faultless condition, as
intended, with an awareness of safety and potential hazards, and in accordance with the
operating manual.
The device is intended exclusively for laminating suitable materials. Any other use or any
use exceeding this is considered unintended use. The manufacturer shall not be liable for
any damage that results from misuse. The operator is solely responsible for the resultant
risk.
Safety instructions
The device is designed for an AC mains supply from 100 V to 240 V. It must be connected
exclusively to sockets with a grounded conductor contact.
The device must be operated exclusively in a dry environment and must not be exposed to
any moisture (spray, mist, etc.).
Do not operate the device in potentially explosive atmospheres.
Do not operate the device in close proximity to high voltage lines.
If the device is operated with an open cover then it is essential to ensure that clothing,
hair, jewelry and similar personal effects cannot come into contact with the exposed,
rotating parts.
The device or parts of it may become hot during lamination. Do not touch during operation
and allow to cool prior to changing the film if necessary.
Risk of crushing when locking the heated rollers or closing the cover.
Only execute the actions described in this user manual. Further work must be carried out
exclusively by trained personnel or service technicians.
Unprofessional intervention or modifications to the device may endanger
When opening the housing cover a risk of death exists due to live parts.
