10
3 Attaching the Laminator to the Printer
①
Switching off the Printer.
Switching off the Laminator.
②
Insert the hooks of the Laminator to the holes by the Card Ejection Slot of the Printer.
Insert the hooks of the Card Stacker to the holes by the Card Ejection Slot of the
Laminator.
③
Connect the Laminator with the Printer via the serial interface.
A standard cable RS-232 SERIAL SUB D9 connector jack is used.
④
Connect the Power Cable of the Printer.
Connect the Power Cable of the Laminator.
<Printer>
<Laminator>
RS-232C cable