38
EN -
39
EN -
Problem
Cause
Solution
Liquid
underneath
the appliance.
The blade
29
has not been
inserted correctly so that the
mixing bowl
5
leaks.
Insert blade
29
correctly
(see “Using and removing
the blade” on page 23).
Seal
28
for the blade is
defective.
Insert new blade seal
28
(see “Cleaning, checking
and replacing seals” on
page 34).
Liquid spilled out from the
mixing bowl
5
flowing onto
the surface through the
overflow hole
14
of the main
unit
15
. (See “Overflow” on
page 22.)
When mixing liquids at
speed
10
or on turbo, the
mixing bowl
5
must not
contain more than 33.8 oz
/ 1 L, otherwise liquid may
spill out. For speed settings
of less than 10, the mixing
bowl
5
may be filled up to a
maximum of 2.2 L / 2.3 QT.
Liquid
escapes
through the mixing
bowl lid
34
on the
mixing bowl
5
.
Seal
33
has not been inserted
correctly.
Insert seal
33
correctly (see
“Cleaning, checking and
replacing seals” on page
34).
Seal
33
is defective.
Insert new seal
33
(see
“Cleaning, checking and
replacing seals” on page
34).
No temperature can
be set.
User is not in a custom mode
and is using a preset mode.
Press the
MODE
button
23
until the appliance
returns to custom mode.
Parts of the appliance
are discolored.
Certain food or spices (e.g.,
curry) may discolor plastic.
This is not a defect with the
appliance.
Wash thoroughly although
discoloring in plastic might
be unavoidable.
A speed setting
exceeding 3 cannot
be selected.
A temperature has been set. Set temperature to 0.
The appliance stops
after 15 minutes.
A speed setting 7 - 10 was
selected. At these speed
settings, the appliance will
function for a maximum of 15
minutes without a pause.
Select speed setting 0 - 6
(see “Setting the speed”
on page 20).
When switching
on, the set time is
automatically set to
15:00.
Problem
Cause
Solution
The mixing bowl
lid
34
/ the deep
steaming tray
3
cannot be opened.
The electronic lock is
activated (see “Electronic
lock” on page 18).
Stop the appliance, let it
cool and try removing the
mixing bowl lid
34
/ the
deep steaming tray
3
.
Did you try to open the
mixing bowl lid
34
or the
deep steaming tray
3
while
appliance was cooling down?
Possibly, the electronic lock
is blocked.
Turn the mixing bowl lid
34
/ the deep steaming tray
3
with both hands clockwise
until it is completely closed
(see “Put the lid on the
mixing bowl” on page 25)
or (see “Preparation of the
steamer” on page 28).
14.2 Error messages on the screen
Display
Cause
Remedy
E3
The appliance is overloaded.
Odor or smoke may develop.
• The appliance can be used to process
up to max. 16.7 oz / 500 g of flour.
• Let the appliance cool down
completely for at least 10 minutes
before next use. Afterwards, it is
ready for use again.
The mixing bowl lid
34
or
deep steaming tray
3
have
not been placed correctly
onto the mixing bowl
5
.
Close the mixing bowl lid
34
correctly
(see “Put the lid on the mixing bowl” on
page 25).
Or close steaming tray
3
correctly (see
“Preparation of the steamer” on page
28).
The turbo function cannot be
used as the food temperature
inside the mixing bowl
5
exceeds 140°F / 60 °C.
Set the speed using the
SPEED
button
19
and the
SETTING
dial
20
(see
“Setting the speed” on page 20).
HHH
Temperature in the mixing
bowl
5
is too high. There is
not enough food or liquid in
the mixing bowl
5
.
Switch the appliance off and let the
mixing bowl cool down. Then add a
sufficient amount of food or liquid into
the mixing bowl
5
.
----
The scale
17
is overloaded.
Remove some weight from the scale. The
maximum weight is 176.5 oz / 5000 g.
