![TEAM CUISINE SPM-128CS Manual Download Page 15](http://html1.mh-extra.com/html/team-cuisine/spm-128cs/spm-128cs_manual_3948789015.webp)
28
EN -
29
EN -
10. Steam mode
WARNING! Risk of burn injury!
• When opening the lid
1
or
34
during operation, hot steam may escape.
NOTE:
these user instructions describe the basic functions such as mixing,
chopping and steaming. For information on the preparation of special dishes, refer
to the recipe book included in the box.
10.1 Steam mode preset
-
Preset time: 20 minutes (adjustable).
-
To skip the preheating process and directly proceed to steam, press the
START / PAUSE
button
20
.
-
If the mixing bowl
5
temperature reaches 205 °F / 95 °C, it will automatically activate
and start the steamer countdown.
10.2 Setting up the steamer
1. Place the mixing bowl
5
onto the main unit
15
.
2. Fill 33.8 oz / 1 L of water into the mixing bowl
5
. This corresponds with the second
marking from the bottom (
I
).
I
3. Check that the seal
4
of the deep steaming tray
3
has been installed correctly.
4. Put the deep steaming tray
3
slightly twisted onto the mixing bowl
5
.
5. Turn the deep steaming tray
3
so that it locks safely into place. The appliance can
only be started when the steaming tray
3
is fixed correctly.
NOTE:
if the deep steaming tray
3
has not been put on correctly, the symbol
will appear on the screen
26
.
6. Place food into the deep steaming tray
3
and shallow steaming tray
2
.
NOTE:
even if you only need the shallow steamer tray
2
, both steaming trays
3
and
2
must be inserted all the time, so that no steam can seep out of the lid seal.
7. Place the filled shallow steaming tray
2
on deep steaming tray
3
.
8. Close the steamer with the lid
1
.
10.3 Starting the steaming process
1. Use the power switch
7
to switch on the appliance.
2. Press the
MODE
button
23
repeatedly until the symbol appears on the
screen
26
.
3. Press the
START / PAUSE
button
20
to begin pre-heating the appliance.
During this time
-
There is no countdown of the time on the screen
26
.
-
PrE
will display on the screen when the heating process starts.
-
The
TIME
button
21
can be used to change the preset time.
-
The electronic lock is activated.