18
2-1-4. Graph list
Graph list
Graph analysis
Layered display of graphs
This shows a list of recorded data graphs.
A maximum of 8 data graphs can be saved.
NO
Recording number
Date h : m
Date of recording
Sensor
Sensor value memory number
TRG
Trigger type
Camera: Snapshot when the trigger turns off
SLOPE
1
: Rising trigger when trigger on
SLOPE
z
: Falling trigger when trigger on
TRG LEVEL
Level when trigger is on
Deleting data
When the graph list is open, press and hold the REC and ESC
buttons at the same time to delete the most recently recorded
data.
For other ways to delete data, see “11-3 Recorded data dele-
tion” on page 60.
Graph analysis
Use the
5
and
b
buttons to select the graph data, and press
the ENT button.
Trigger position
The cursor appears at the trigger position (page 54).
Use the
g
and
t
buttons to move the cursor so you can
check the load at the cursor position.
Press the ESC button to return to the graph list screen.
NOTE
On the graph analysis screen, if the recorded graph was in
the middle of hold measurement, the hold line appears along
with the hold name and hold value at the bottom right of the
graph.
2. Shortcut menus
