- 14 -
Setup
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
or
Component video outputs (DVD)
Some TVs or monitors are equipped with component video inputs.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks
on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit
to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your
TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to view the higher quality
picture playback.
Progressive outputs (DVD)
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively
scanned video signal.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks
on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit
to Y VIDEO IN jack on your TV, the Blue plug P
B
/C
B
VIDEO OUT jack on your Unit to P
B
/C
B
VIDEO IN jack on your TV
and the Red plug P
R
/C
R
VIDEO OUT jack on your Unit to P
R
/C
R
VIDEO IN jack on your TV to enjoy highest quality picture
with less flicker.
Connect the component video cable to TV, press SETUP button and select Video Output to YUV (see page E-33 for
setting of Video Output). To select the output signal for better picture quality, press the P. SCAN button on the remote
control when DVD is stopped. "P. SCAN" will be displayed.
Notes:
• When progressive output is activated, no video signal output from S-video and RCA (CVBS) video jacks.
• Make sure your TV supports progressive scan component video signal, press the P. SCAN button twice until
"CVBS" display for going back CVBS video signal.
Notes :
• Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted
because DVD discs are copy protected.
• When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connection.
• Refer to the instruction manual of the connected equipment as well.
AUDIO OUT
SUBWOOFER
DVD Unit
Audio cable (not supplied)
Component
video cable
(not supplied)
HA@
MDEJA
To
VIDEO OUT
P /C
4 4
To
VIDEO IN
P /C
4 4
To
VIDEO OUT
P /C
* *
To
VIDEO IN
P /C
* *
To VIDEO OUT
Y
To
VIDEO IN
Y
