- 15 -
Setup
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
B. Connecting a VCR
1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN
jack on your TV, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your TV. If you
want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT
jacks from the Main Unit to your TV.
2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on your
VCR.
3. Using the Audio cable (not supplied), connect the left/right AUDIO IN jacks on your Unit to the AUDIO OUT jacks
on your VCR.
To hear the sound from television programmes through the Unit
Sound from the television does not go to the speakers of the DVD amplifier Unit with the suggested connections. To
hear sound from television programmes through the DVD amplifier's loudspeakers you need to use your video
recorder as a television tuner. To do this follow these steps:
1. Press the FUNCTION button on the DVD Amplifier Unit to get AV_IN mode, shown on the front panel display.
2. On the television, select the AV or scart input channel for the DVD amplifier Unit.
3. On the VCR, select the television programme you want to watch.
4. On the DVD amplifier Unit select normal stereo or Pro Logic decoder modes according to your preference.
• Please refer to the AV_IN rows of the table on page 20 describing which speakers the sound will come out of.
• When using the VCR as a television tuner, you cannot watch one programme while recording another.
Watching a DVD
1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel to select "DVD".
2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the
VIDEO IN jack that is connected to the Unit.
Watching a Video tape
1. Turn on the Unit, use the FUNCTION button on the remote control or front panel to select "AV_IN".
2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the
VIDEO IN jack that is connected to the Unit.
3. Turn on the VCR and follow the instructions included with it to play the videotape.
Notes:
•
If you want sound from the Unit and sound from equipment connected to it to come only from the speakers of the Unit, do not
connect the left and right audio plugs from the Unit to your TV.
•
If VCR Audio is mono, surround speakers sound level will be low or absent.
AUDIO OUT
SUBWOOFER
DVD Unit
Video cable
(not supplied)
Audio cable
(not supplied)
(yellow)
(yellow)
(red)
(red)
(white)
(white)
