- 33 -
Radio Operation
FM Stereo
• Press the FM MODE button on the remote until "
" appears on the display.
Weak FM stations
• Press the FM MODE button on the remote until the "
" word appears on the display. Background noise will
be reduced but the signal reproduced will be mono. To restore stereo reception, press the FM MODE button on the
remote to select STEREO.
Note:
• The left / right front speakers and subwoofer are activated only.
To search for a station automatically
• Hold down the
TUNING
buttons on the remote or
SKIP/TUNING
buttons on the front panel for 1 to 2
seconds, and a station is searched for automatically. After tuning in a station, the search stops.
• The search may not stop at a station with a very weak signal.
Presetting stations
You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM band can be preset.
1. Press FUNCTION button until the frequency band appears on the display.
2. Press the BAND button to select the desired band.
3. Use the
TUNING
button to find your desired station.
4. Press the MEMORY button on the remote.
5. Press the
NEXT or PREV
button to select the preset number and press the MEMORY button on the remote
to store the station.
6. Repeat steps 2-5 to store other stations.
Tuning into a preset station
1. Press FUNCTION button until the frequency band appears on the display.
2. Press the BAND button to select the desired band.
• Press the PLAY button and
NEXT or PREV
button on the remote, or press the PLAY/PRESET button on
the front panel to select the presetted station or use the numbered buttons to enter the number to select the presetted
station.
Example: To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Tuning into a station manually
1. Press FUNCTION button on the remote until the frequency band appears on
the display.
2. Press the BAND button on the remote or STOP/BAND button on the front
panel to select the desired band.
3. Press the
TUNING
button on the remote or
SKIP/TUNING
on the
front panel to tune in the desired station.
