SECTION 17: Getting Label Print Job Started
47
5) After the second test pattern has been printed,
take out the medium from the disc tray.
6) Find out the longest line that is aligned with, or is
least displaced with respect to, a scale mark. (You
can use either the upper and lower scales or the
left and right scales.) In the above example, you
can get a value of +2 on the upper scale and a
value of -3 on the lower scale. Add the two
numbers and you get -1. Enter this -1 in the Print
Length box on the
Maintenance
tab and click
OK
.
*When you click
OK
, the data specified are loaded
into the P-55 and the following message is
displayed during the data loading.
Do not turn off the P-55 while the message is
displayed.
Reading (N1): +2
Reading (N2): -3
