SECTION 17: Getting Label Print Job Started
42
2
Correcting Displacement and Hue Shift Between Colors
With the P-55 you can correct for displacement of boundaries and hue shift between colors. These
corrections are made by first printing test patterns and then reading and entering necessary corrective
values from the printed patterns.
1. Correcting
displacement
1) Select
Printers & Faxes
from
Start
. (In Windows
2000, select
Start
-->
Settings
-->
Printers
.)
ATTENTION
If more than one P-55 unit is connected to the
computer you use, you are unable to correct
displacement, hue shift between colors, or
aspect ratio for all of the P-55 units at the same
time. Correct settings for them one by one.
2) Right-click the icon for
TEAC P-55 Disc Label
Printer
and select
Printing Preferences
.
If more than one P-55 unit is connected to the
computer you use, you are unable to correct
displacement, hue shift between colors, or
aspect ratio for all of the P-55 units at the same
time. Correct settings for them one by one.
3) Click the
Maintenance
tab.
To correct displacement and hue
shift between colors
*Please restart the host computer if the
[Maintenance] tab is not displayed.
Correction values are specified for PHOTO and
COLOR (*1) ribbons each. The type of ribbon
displayed on the
Standard
tab is the type of
ribbon installed in your P-55.(*2)
If the type of ribbon displayed is different from the
type of ribbon installed, close the
Printing
Preferences
window and then open it again.
If, with the Printing Preferences window open, you
replace the current ribbon with a ribbon of a
different type and correct displacement and hue
shift between colors, the settings take effect for
the ribbon that was installed before replacement,
not the ribbon currently installed.
Make sure you close the
Printing Preferences
window first before replacing the ribbon with a
ribbon of another type and correcting
displacement and hue shift between colors. Then,
replace ribbons, open
Printing Preferences
again, and change the correction settings.
(*1)--- The same values as for COLOR ribbon take effect for black ribbon.
(*2)--- The type of ribbon is displayed in the field for Ribbon type circled as shown in the left-hand image.
NOTE