Teac P-55 AutoPrinter Instruction Manual Download Page 41 | Manualshive

Page: 41 / 71

background image

SECTION 17: Getting Label Print Job Started

41

ATTENTION:

Creating PRN files

From the window “TEAC P-55 “PRN” FILEOUT OPTION, select the type of ribbon that is appropriate for
the type of ribbon installed.
* See 4) of 10) in this section.

If the type of ribbon installed and the information on the type of ribbon included in a PRN file do not match,
the message “ERROR RBN-IMG Mismatch” appears. (See

SECTION 14: Error Messages Explained

.)

If a PRN file created using any of the older drivers (P-55 Utility Software Ver.1.0.17 or older) is sent to the
printer, the message “ERROR IMG Type too Old” appears. (See

SECTION 14: Error Messages

Explained

.)

If you try to print while the printer driver and the setdata applied to the printer do not match, the printer
stops the print operation displaying the message “ERROR Mismatched data”. (See

SECTION 14: Error

Messages Explained

.)

This function is designed to prevent ribbon cut and other similar errors that can be caused by performing a
print operation using a PRN file for a different type of ribbon.

Note that this function is supported by the latest version of the printer firmware.
To use this function, you must update the firmware to the latest version.

*For detailed information on the setdata appropriate for the printer driver, contact your local dealer.

[NOTE]

Make sure that the name of each PRN file you create reflects the type of ribbon and the version of printer
driver to be specified in the file so that you can easily remember the details specified in the file.
e.g. PRN file name: “Image_v2.00.xx_Photo.prn”
        - Image (Name for the image or text being printed)
        - v2.00.xx (Version of the printer driver)
        - PHOTO (Type of ribbon specified)

«
...
39
40
41
42
43
...
»

Summary of Contents for P-55 AutoPrinter








































































Reviews:

No comments

Related manuals for P-55 AutoPrinter

Brand: Kanguru Pages: 81

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands