It is VERY IMPORTANT that you DO NOT turn off the power while this function is running.
Turning off the power before the System has completed the loader upgrade may leave
your autoloader in a state where it no longer functions correctly. If you are in any doubt
about this, please contact
TEAC
or an authorized
TEAC
distributor before using this
feature.
8.5.3 Loader Utilities
Loader Utilities provide a means by which the loader mechanism can be tested or
diagnosed. These utilities are meant for
TEAC
approved service personnel and advanced
users only. If in doubt, do not use these utilities.
8.6 System Information
These functions are used to display information about the various components installed
in the System.
8.6.1 PCA Info
This displays the installed firmware level, amount of RAM and the number of recorders
found in the System, and the number of recorders licensed in this System. In addition,
network information including IP address, network mask and MAC address are displayed.
8.6.2 Writer Info
This displays the recorder manufacturer, model number, and firmware version. While it
is possible to use different writer types, and different firmware revisions,
TEAC
recommends using the same writer type and the latest approved writer firmware.
8.6.3 Hard Drive Info
This will display the manufacturer, model number, and capacity of the installed hard
drive or drives.
8.6.4 Autoloader Info
This displays the Autoloader information.
8.7 Upgrade License
Enabled options can be changed via these functions. To get a new key that will enable
new options, contact
TEAC
or an authorized
TEAC
distributor.
8.7.1 Show Current Key
This will display the currently installed options Key String. You MUST have this key string
available when contacting
TEAC
or an authorized
TEAC
distributor.
8.7.2 Enter New Key
Use this option to enter a new installed options Key String. Entering this key string can
change your installed options. Contact
TEAC
or an authorized
TEAC
distributor to get a
new key string. See the Entering Text section of this chapter for instructions on entering
text.
8.8 Quick Start Copying
This quick start section assumes the System is ready and in the main standalone menu.
Use the up
/\
or down
\/
arrow keys to put the
>
cursor (on the Left of the LCD display)
next to the
Copy
menu line. Press the
ENTER
key to select that menu function. If there is
