background image

CODES OR COMBINATION THEREOF THAT ARE PRODUCED, GENERATED OR OTHERWISE TRANDFERRED TO 
THE MEDIA BY THE USE OF 

TEAC

 PROVIDED PRODUCTS, NOR IS 

TEAC

 LIABLE FOR THE INTEGRITY, VIABILITY 

OR LONGEVITY OF THE DATA ENCODED ON THE MEDIA. 
 

TEAC

  SHALL  IN  NO  EVENT  BE  LIABLE  FOR  DIRECT,  INDIRECT,  SPECIAL,  INCIDENTAL,  CONTINGENT,  OR 

CONSEQUENTIAL  DAMAGES  RESULTING  FROM  ANY  DEFECT  IN  THE  PRODUCT  OR  ITS  DOCUMENTATION 
INCLUDING  DAMAGES  FROM  LOSS  OF  DATA,  EVEN  IF 

TEAC

  OR  AN  AUTHORIZED 

TEAC

  DEALER  HAS  BEEN 

ADVISED  OF  THE  POSSIBILITY  OF  SUCH  DAMAGES.    YOU  AGREE  THAT 

TEAC’s

  LIABILITY  ARISING  OUT  OF 

CONTRACT, NEGLIGENCE, STRICT LIABILITY IN TORT OR WARRANTY SHALL NOT EXCEED THE LESSOR OFANY 
AMOUNTS PAID BY YOU FOR THIS PRODUCT OR THE 

TEAC

 PUBLISHED PRICE. 

 
Any written or oral information or advice given by 

TEAC’s

 dealers, distributors, agents or employees will in 

no  way  increase  the  scope  of  this  warranty.    Nor  may  you  rely  on  such  oral  or  written  communication.  
Some  states  do  not  allow  exclusions  or  limitations  of  implied  warranties  or  liability  for  incidental  or 
consequential damages, so the above limitations or exclusions may not apply to you.  This warranty gives 
you specific legal rights, and you may also have other rights that vary from state to state. 

 

Purchaser’s Remedies

 

 

If an TEAC Distributor/Reseller or an End User desires to make a warranty Claim, the Distributor/Reseller or 
End  User  shall,  if  requested  by  TEAC,  ship  the  Product  to  TEAC’s  authorized  service  facility,  postage  or 
freight prepaid.   TEAC shall, at its option, take one of the following two courses of action for any Products 
which TEAC determines are defective in materials or workmanship: 
 
1)

 

Repair the Product with either new or refurbished parts; or 

 
2)

 

Replace with a new Product. 

 
And  if  to  a  US  Lower  48  Address  (any  United  States  address  in  the  lower  48  contiguous  states),  ship  the 
product  to  the  End  User  or  to  the  authorized  TEAC  Distributor  via  Fed  Ex  Ground  or  other  similar 
transportation method freight prepaid. 
 
PURCHASER’S  REMEDIES  SHALL  BE  LIMITED  EXCLUSIVELY  TO  THE  RIGHT  OF  REPLACEMENT  OR  REPAIR  AS 
PROVIDED AND DOES NOT INCLUDE ANY LABOR COST OR REPLACEMENT AT END USER’S SITE.  TEAC SHALL 
NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF THIS WARRANTY, 
INCLUDING  WITHOUT  LIMITATION,  ANY  DAMAGES  RESULTING  FROM  PROPERTY  DAMAGE,  PERSONAL 
INJURY OR BUSINESS INTERRUPTION. 

 

Governing Law and Venue 

 

The sale and purchase of Products covered hereby and all terms and conditions of this Warranty shall be 
governed  by  the  laws  of  the  State  of  California,  and  any  disputes  hereunder  shall  be  venued  in  the  El 
Dorado County District Courts in California.   

 

If Your Product Requires Support 

 

If your product requires servicing, you should first contact the place of purchase and request support.   If 
the service request cannot be completed by the place of purchase, you should contact 

TEAC

 directly using 

one of the following methods:   
 
E-Mail:   [email protected] 
Telephone: +49(611) 7158 657 
Fax:  +49(611) 7158 4657 
 
Before shipping any item to 

TEAC

, first obtain an RMA (Return Material Authorization) Number from 

TEAC

 

Summary of Contents for AP-150










































































Reviews: