1.4.9.3 Audit
Audit provides a fast way to ensure that the disc in the recorder has actually been
recorded without performing a time consuming full Compare option. The Audit function
will read the start of the disc and then read the end of the disc to make sure that both
the start and end are fully recorded. This adds only a few seconds to the copy time.
Audit can be enabled or disabled at any time during a Copy job via the Edit Job dialog.
Audit and Compare are mutually exclusive, meaning you can only have one of them
selected at any given time.
The Audit function can only be used in conjunction with Copy, and cannot be used as a
standalone operation.
1.4.9.4 Print
The Print check box is automatically selected when a print image (Local PRN, System PRN
or Template) is selected.
1.4.9.5 Fast Start
The Fast Start option allows the System to load blank media and start writing as soon as
the disc image begins transmitting over the network. This feature can save huge
amounts of time when sending large image files (e.g. 50GB Blu-ray) because without Fast
Start the entire image needs to be moved to the System before the job can begin. It is
recommended for use only where you have a fast (recommended Gigabit) and reliable
connection to the System, and where not many other users are logged on (which can
create a busy network). If you are on a slow or unreliable connection, or if the network
the System is connected to is extremely busy, Fast Start is not recommended. If you find
that image transfers are failing due to network time out problems, do not use Fast Start.
This option may be disabled by the Administrator on a user-by-user basis.
1.4.9.6 No Overlap
If the System is running multiple jobs at the same time, it is possible to have jobs
interwoven (mixed) in the output hoppers. To prevent jobs from being mixed, and to
force this job to wait until all of the jobs ahead of it in the queue are completed and to
force all jobs below in the queue to wait until this job is completed, choose the ‘No
Overlap’ feature.
Under normal running conditions all discs from this No Overlap job will now be together
as consecutive discs in the output hoppers. The only time that this option can be
overridden is where a higher priority job is sent to the machine after this job has already
started. The higher priority job will always take precedence even over No Overlap jobs.
1.4.10 E-Mail Settings (all systems)
TrueNet provides easy access to the System
e-mail
notification
options
notifications must be enabled by the
Administrator before any e-mails can be
sent by the System). The Create New Job
dialog box includes an ‘Email’ tab (top left)
that gives access to your personal e-mail
selections. Select the e-mails you want to
receive for this job, and if you want to
receive these e-mails for all jobs, click on
