SECTION 3 :
Installing and Using Software
15
Before you can begin to use your veloCD ReWRITER you need to install the software from the included
CD Blender CD-ROM. The software automatically loads all necessary device drivers as well as
TDK’s CD Blender software suite.
If you have any problems, our technical support staff will help you.
INSTALL DEVICE DRIVERS
Your veloCD ReWRITER acts as a "CD-ROM Drive" for purposes of installation and setup. In some
cases, you will need to install additional drivers to make use of all of the features of the veloCD
ReWRITER.
Using the veloCD on a PC:
•
As a CD-ROM: The computer’s operating system, Windows 95/98/ME/2000/NT 4.0, supplies a generic
CD-ROM device driver that allows the veloCD ReWRITER to function as a standard CD-ROM drive.
You don’t need to install anything else.
•
As a CD-R or CD-RW device: In order to write to CD-R or CD-RW media, you will need to install the
TDK CD Blender software suite.
To install a device driver, follow the instructions provided by the driver’s supplier.
SECTION
3
INSTALLING and USING SOFTWARE
