28
internal calls
In the menu item
Internal calls
calls from TCS:BUS indoor stations to
an IP device can be configured (ill. 24). These calls are triggered from
the TCS:BUS indoor stations via a configurable control function key.
The call destination designates the SIP destination. As with the door
calls, this can be a SIP account or an IP address (SIP direct call,
"Peer-to-Peer").
You can define up to 200 internal calls. The actually achievable num-
ber of internal calls depends on the possibilities of the TCS:BUS in-
door station. For further information see the product information of
the indoor station.
Group calls are not feasible.
Fig. 24: internal calls
TCS devices
In the menu item
TCS devices
you can allocate a SIP address to the
TCS:BUS devices (indoor or front-door stations), under which they are
available in the IP network (ill. 25). Door calls or internal calls from
the TCS:BUS to the IP network have to be configured again, if a com-
munication in reverse direction is required.
Requirement for the allocation of TCS:BUS devices to SIP
addresses is the registration of the SIP user ID's at a SIP
server (internal or external), that was determined before.
Type of device
The type of device can be selected from the drop-down
menu (front-door or indoor station).
user ID
The user ID is suitable for the identification within a SIP do-
main.
Auth. ID
The authentication ID is the user name for the login at the
SIP server.
User password
User password to login at the SIP server.
SIP name
The SIP name is displayed as name of the source.
TCS SN/AS
SN is the serial number of a TCS:BUS indoor station.
AS is the AS address of a TCS:BUS front-door station.
Fig. 25: TCS devices
