11/2012
7
TCS TürControlSysteme AG,
www.tcsag.de
Subject to technical changes.
TCS Hot
line • Mail: [email protected]
PI_AVU940x0-uk
Connect the lines
!
Use the enclosed small screwdriver to connect the lines and further to prevent damag-
ing the device.
The connections are located at the backside of the front-door station.
Connect the lines of the door opener and relays according to the labeling on the type
plate (and illustration below).
Observe, that the door opener must be connected depending on the type of power sup-
ply (see table below).
Connect the front-door stations over the RJ45 connector with the ethernet.
!
It is not necessary to use an external power supply when using a PoE switch. Using an
external power supply could damage the device!
Do not connect!
relay 2 (30 V; 1 A)
relay 1 (30 V; 1 A)
mode switch
power supply 12 - 26 V DC (from NGV1011)
RJ45 connection ethernet/LAN/PoE
no
com
nc
no
com
nc
