14
11/2012
TCS TürControlSysteme AG,
www.tcsag.de
Subject to technical changes
TCS Hotline • Mail: [email protected]
PI_AVU940x0-uk
Reset to factory settings
If the IP address was changed manually, the web browser is no longer able to show the
site. If this is the case, enter the new IP address manually in the browser to get back to the
start page. You might also change the address area of your PC again.
If the set IP address or the administrator password is not known, the device can be reset
to factory settings.
Switch off the power supply.
Switch the DIP switches 3 and 4 at the mode switch to OFF.
Switch on the power supply again.
The factory settings are loaded:
IP address:
192.168.1.250
sub net mask:
255.255.0.0
user:
admin
password:
1234
After around 2 minutes, the front-door station is accessible again.
Switch the DIP switches 3 and 4 to ON again.
