20
11/2012
TCS TürControlSysteme AG,
www.tcsag.de
Subject to technical changes
TCS Hotline • Mail: [email protected]
PI_AVU940x0-uk
activation code
Activation code: With this code the relay is activated by the telephone. The same
code can be used for both relays, thus both relays are activated at the same
time.
Activation codes are entered with the numeric keypad of the SIP enabled end
device.
If *7 is entered in the field, it is only necessary to press 7 on the telephone (* only fills the
digit because the code must have 2 digits.)
relay switch time
Is entered double-digit in seconds [01-99].
To activate a relay
permitted by any
incoming call
Relay switches when a call comes in.
delay between relay
1 and 2 in mode 5
Time in seconds between closing the relay contact 2 after relay contact 1, if relay
2 was programmed in mode 5, double-digit [01-99].
After finishing the settings press the
save
button.
