12.2.2
MX Receiver Settings
Item
Description
Enable
Select/Clear to enable/disable the stream reception, respectively.
Source address
IP address of the codec that will transmit the stream.
Port
The local port number of the BC840-MC.
12.3
Advanced
Important: If in doubt about these settings, do not change the default values.
12.3.1
Audio Input
Audio > Advanced > Audio Input
Item
Description
Channels
Range: [1…2]. When selecting 1 channel, only the signal on the ‘A1’
input is used (either line or microphone).
Sample rate
Range: [7850…48000]. Allows you to enter custom settings (other
than those included in the Profile list in the Input Settings section),
e.g., for communication with a C-20 codec.
Examples:
● 7850 Hz
● 15710 Hz
● 15710 Hz
● 43200 Hz
A-law
A-law
PCM
PCM
Auto detect
threshold channel
1
Range: [-60…0] dB. The audio level is measured. When the audio level
reaches the threshold set here, the audio detect flag is set. This flag
can be used to generate a ‘silence’ alarm or a ‘too much noise’ alarm.
Auto detect
threshold channel
2
Audio
101
