The Focus LED - also on the back of the housing - shines orange, indicating that Focus
Assist has not registered a maximum sharpness value yet.
2
Slowly turn the focus ring of the lens until the LED shines red.
3
Next, turn back the focus ring to find the point where the Focus LED shines green.
This is the point where the camera is properly focused.
LED state
Indicates
Action
Orange
Focus Assist has not registered a
maximum focus value yet.
Turn the focus ring of the lens all
the way from left to right until a
maximum value is seen.
Red
Focus Assist has registered a
maximum focus value, but is not
properly focused yet.
Slowly turn the focus ring until the
Focus LED shines green.
Green
The camera is properly focused.
None
11.1.3
Image profiles
Video > Image > Image profiles
Image profiles
The accordion style menus at the bottom of the Image tab allow you to configure Exposure,
Day/Night, White Balance, and Appearance settings. Combinations of these settings can be
saved to and loaded from a profile. In addition to custom profiles created by the user, the
profile list includes preset profiles for specific purposes. When a profile has been selected,
changing one of its defined parameters sets the Profile box to '--'.
Item
Description
Active profile
The active combination of settings.
Load
Activates the selected profile.
New
Enables you to enter a name for a new profile.
Save
Saves and activates the selected profile.
Erase
Removes the selected profile.
Profile list
Available profiles.
11.1.3.1
Image profile management
To create a custom image profile
1
On the Video page, click the Image tab.
2
In the Image profiles section, click New.
3
Enter a name for the new profile, and then click OK.
Video
39
