TCH group BC840-MC series User Manual Download Page 73

Page: 73 / 155

To upload a font

In the Font management section, click Browse.
The Open dialog box displays.

Browse to the folder containing the font to be uploaded.

Select the correct file (.ttf extension), and then click Open.
The file appears in the File text box on the web page.

To start the upload, click Add.
The new font is added to the Font list and to the Font name list in the Advanced OSD
Bar # Settings section.

To remove a font

In the Font management section, select the font.

Click the Del button.

11.7.4

Graphics

Video > OSD > Graphics, with 3 OSD bars and a graphic (bottom right) in the preview

The Graphics tab enables you to manage graphics, and scale and position a selected graphic
on your screen.

Video

Summary of Contents for BC840-MC series




























































































































































Search results

Summary of Contents for BC840-MC series

Reviews:

Related manuals for BC840-MC series

Brands by name

Popular brands

TCH group BC840-MC series, User Manual

Search results

Summary of Contents for BC840-MC series

Reviews:

Related manuals for BC840-MC series

Brands by name

Popular brands