TC-Helicon VoiceWorksPlus, User Manual

Page: 45 / 49

41 41 41 41 41 41 41 41 41
M1: Controller enable and disable
CC-Ctrl: (CC control) Enables or disables CC message
control.
VibCtrl: (Vibrato control) Specifies how the Mod
Wheel message affects vibrato. The Boost setting will
add more vibrato once the part of the wheel
movement reaches the corresponding amount of
vibrato and then return to the original amount once
the wheel resets to its rest position.The Manual setting
allows the full range of control of vibrato once the
wheel is moved.To restore the factory vibrato amount,
recall the preset.
M2:Various
PB+-: (Pitchbend range) Sets in semitones the range
that MIDI pitch bend information will alter pitch shifts
in both Harmony and Modeling modes.
Trans: (Notes mode transposition) This transposes the
harmony voices in Notes mode to allow it to be
controlled by upper or lower sections of a MIDI
keyboard if required.The value corresponds to octaves.
SyxID (MIDI System Exclusive ID number) When
addressing multiple VoiceWorksPlus units on the same
MIDI In/Thru chain with a Sysex editor, each one
should have its own ID or they all will be edited in the
same way.
M3: Keyboard zone settings
KBSplitZone: (Split zone) Sets whether MIDI notes
above or below the split point are allowed for Notes
mode and Chord mode presets.
Note: Sets the MIDI note above or below which the
keyboard split will be active.
F0 to F1- Preset Management
F0: MIDI Dump initiation
Select which VoiceWorksPlus information you want to
back-up via MIDI:
All (User+Setup): dumps all user settings and user
presets in one file
User Bank: dumps only user presets
Setup: dumps only setup data
User 1 to 99: dumps the individual user preset
selected.
Press the Data Wheel to start the dump.
F1: File functions
Function: Pushing the data wheel triggers the listed
function.
Restore Setup: reverts all setup parameters back
to factory settings.This includes the front panel
mix settings.
Erase User Bank: erases all user presets
CAUTION - do not leave this screen set to “Erase
User Bank” or you stand the chance of accidentally
erasing all of your presets in a return visit to the Edit
menu.
THE SETUP MENU