TC-Helicon VOICELIVE 3 EXTREME Reference Manual Download Page 20

Page: 20 / 127

Introduction

VoiceLive 3 – Reference manual (2014-03-29) 18

8. Double/Comp footswitch

On the Vocal layer, tap the Double/
Comp footswitch to turn the Double
effect on or off.

Double encompasses effects such as 1 Voice
Tight, 2 Voices Wide and 4 Voices Wide.

On the Guitar layer, tap the Double/Comp foot-
switch to turn the Compressor on or off.

9. Harmony/Drive footswitch

On the Vocal layer, tap the Har-
mony/Drive footswitch to turn
the Harmony effect on or off.

Harmony encompasses effects such as High
(3rd up), Low (4th below) and Low & Lower (4th
below and 6th below).

On the Guitar layer, tap the Harmony/Drive foot-
switch to turn the Drive effect on or off.

Drive encompasses effects such as Boost, Boost
& Drive and Drive.

Summary of Contents for VOICELIVE 3 EXTREME
































































































































Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands

TC-Helicon VOICELIVE 3 EXTREME, Reference Manual

Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands