manualshive.com logo in svg

TC-Helicon VOICELIVE 3 EXTREME, Reference Manual, Page: 22 / 127

Share
Download
TC-Helicon VOICELIVE 3 EXTREME Reference Manual Download Page 22

 Introduction

VoiceLive 3 – Reference manual (2014-03-29) 20

Outputs

7

VoiceLive 3 outputs overview

1. 

Guitar THRU:

 If you only need chord detec-

tion and want to pass your dry guitar signal 
onto a different processor or record a dry gui-
tar track, use the THRU jack to pass your gui-
tar signal to your amp.

2. 

Monitor THRU:

 The Monitor THRU jack al-

lows you to receive an incoming Monitor IN 
signal from a mixer and pass it on to another 
monitor.

3. 

Headphone out:

 Connect headphones or 

IEMs to the Headphone out and use the Head-
phone Mix to set up your personal mix.

4. 

Main Outputs:

 The Main Outputs carry Vo-

cals & Effects. If nothing is connected to the 
Guitar outputs, Main outputs also carry Guitar 
signals.

5. 

Guitar Outputs:

 The Guitar outputs carry the 

Guitar signal. If only one output is connected, 
guitar output is automatically in MONO. When 
you connect the Guitar Out(s) to your amp(s), 
guitar sounds will be removed from the Main 
outputs.

6. 

MIDI Out:

 The MIDI Out jack sends MIDI Con-

trol Change messages (MIDI CCs) related to 
footswitches and buttons pressed on Voice-
Live 3. If no CC is sent, there is likely no CC 
assigned to that particular action.

  Currently, Vocal & Guitar effects ON/OFF and 

their respective levels are represented by MIDI 
Control Change messages.

  If you experience hum from your guitar amp or 

PA, try pressing the GRND LIFT switch, locat-
ed between the Headphone out and the Left 
XLR output.

Summary of Contents for VOICELIVE 3 EXTREME
































































































































Reviews:

No comments