TC-Helicon VOICELIVE 3 EXTREME Reference Manual Download Page 121 | Manualshive

Page: 121 / 127

background image

Appendix

VoiceLive 3 – Reference manual (2014-03-29) 119

System Maintenance/

Factory Reset

You can boot VoiceLive 3 in a special System
Maintenance that will allow you to perform sev-
eral system maintenance functions, including a
factory reset.

Entering System Maintenance Mode

–  Turn off your VoiceLive 3.
–  Unplug headphones (if attached)
–  Using a toothpick or a small wire (we recom-

mend a straightened paperclip), press the
button that is inside the Headphone jack. The
button is small and at the very end of the in-
side of the jack. You don’t need to use much
force – so please be gentle. You will feel a
small click when the button presses.

– With the button held down, press the power

switch on your VoiceLive 3.

– Wait until you see the System Maintenance

Screen.

You should see the System Maintenance

screen immediately. If you see the “normal”
VoiceLive 3 screen (without the “System Main-
tenance” banner on top), you haven’t pushed
the button inside the headphone jack correct-
ly. Try again.

– Choose the desired option from the menu us-

ing the Control Knob.

Updating the firmware

using a USB flash drive

If you cannot update the firmware of your Voice-
Live 3 using VoiceSupport software, you can
perform a firmware update with a USB flash
drive.

– Format the USB flash drive to the FAT32 file

system (see the manual of your computer/op-
erating system for instructions).

Reformatting a USB flash drive will erase all

data on it.

– Copy the “.syx” file containing the firmware

update to the USB flash drive.

– Insert the USB flash drive into the USB host

port on your VoiceLive 3.

– Boot your VoiceLive 3 in System Maintenance

as described in “Entering System Mainte-
nance Mode”.

– Select the “Update from USB drive” option.

«
...
119
120
121
122
123
...
»

Summary of Contents for VOICELIVE 3 EXTREME
































































































































Reviews:

No comments

Related manuals for VOICELIVE 3 EXTREME

Brand: Paramount Fitness Pages: 17

Brand: Hamilton Beach Pages: 28

Brand: Fast & Fluid Management Pages: 32

Brand: Vitek Pages: 40

Brand: Rolls Pages: 1

Brand: Mackie Pages: 125

Brand: Pronomic Pages: 4

The Karman Line

Brand: Hungry Robot Pedals Pages: 3

Multifunktions-Mixer

Brand: Klarstein Pages: 46

DANALOG DDX3216

Brand: Behringer Pages: 22

Brand: NSI Pages: 36

Brand: Hotone Pages: 2

Brand: Mackie Pages: 2

Brand: Mackie Pages: 17

Brand: Philips Pages: 7

Brand: Philips Pages: 9

Brand: Philips Pages: 11

Brand: Russell Hobbs Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands