TC-Helicon VOICELIVE 3 EXTREME Reference Manual Download Page 14

Page: 14 / 127

Introduction

VoiceLive 3 – Reference manual (2014-03-29) 12

Top panel overview

2 3

Below is a brief description of the top panel con-
trols and buttons. Full functionality for each will
be described in more detail later.

1. Genre button

Use the Genre button to sort
Presets based on their musi-
cal genre or featured effects.
For example, you may want to
restrict the Presets “visible” to
you in VoiceLive 3 to those that are defined as
“Rock” or “Country” in nature.

2. Setup button

Use the setup button to access
to all system setup settings,
including Input, Output, MIDI,
Tone, Guitar and more.

Push and hold the Setup button to enter the
automated microphone and guitar gain setting
mode.

3. Store button

Use the Store button to store
Presets. Tap once to activate
the store procedure. Tap again
to confirm.

Summary of Contents for VOICELIVE 3 EXTREME
































































































































Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands

TC-Helicon VOICELIVE 3 EXTREME, Reference Manual

Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands