TC-Helicon VOICELIVE 3 EXTREME Reference Manual Download Page 78

Page: 78 / 127

Editing the Guitar layer

VoiceLive 3 – Reference manual (2014-03-29) 76

Guitar Rhythmic block / tab

The Guitar Rhythmic block basically works in
the same manner as the Vocal Rhythmic block.
Please see “Vocal Rhythmic block / tab” for an
overview of the Vocal Rhythmic block.

For the Guitar Rhythmic block, we have included
an improved “tremolo” sound to better replicate
the classic effect.

Tips and tricks for working with

the Guitar Rhythmic effect

– Using Chopper or Pan based Rhythmic ef-

fects can add a lot of flavor to your sound, es-
pecially when used as a special effect.

– Similar to the suggestions for Delay, experi-

ment with using the same Delay and Rhythmic
divisions for guitar and vocals. Conversely,
try different divisions to create more exotic
sounds.

Summary of Contents for VOICELIVE 3 EXTREME
































































































































Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands

TC-Helicon VOICELIVE 3 EXTREME, Reference Manual

Search results

Summary of Contents for VOICELIVE 3 EXTREME

Reviews:

Related manuals for VOICELIVE 3 EXTREME

Brands by name

Popular brands